I thought that my sump pump had ended its life and needed to be replaced. The contractor I found through Home Adviser came out the following day and arrived reasonably promptly. The technician tested the pump and it wasn't responding. He then checked the breaker panel and all seemed well. However he checked to see if power was reaching the outlet, it wasn't so he tripped some breakers and reset them and the power to my pump came on and the pump works so a replacement wasn't necessary. He charged $75.00 which I think was reasonable for a call-out fee and time spent.
toilets work off of siphon.more correctly it's the timely transfer of water from the tank to the bowl through the ports that starts the siphon and carrys the solids and water downstream,thus completing a flush.i also live in florida and due to lots of hard water everywhere can tell you that most likely the toilets are full of deposits and need to be replaced or are of poor quality.all of the toilets from home depot are trash i would suggest getting one from the factory or from a plumbing supply house.DO NOT GET A 1.28gpf...1.6gpf is still legal
Using corrosive chemicals to dissolve a clog is like throwing a grenade down a gopher hole. Instead, Wroblewski recommends flushing your drains weekly with a half cup of baking soda and one cup of vinegar. Let it fizz in the drain for ten minutes, then pour in four cups of boiling water. Find out about the plumbing nightmares that will make you cringe.
The cherry on top, is that throughout this whole experience Gary has asked for and used a TON of my household supplies. From the two towels (one of which you can see in the first picture) he used as drop cloths, the windex he used to not burn the wood with his torch, my wire hanger he bent to measure the space and all of the paper towels, tissues and toilet paper he wiped his hands with. I mean ALL of my other contractors brought their own supplies, how unprepared and unprofessional are these people??!!
My called them because my sewer was backed up. They came out and couldn’t clear it by rooting it (Which was successfully done by 2 previous companies in the past 5 years). He told me it would cost $595 (Outrageous). But that money would go towards trying to Water Jetting. $1000. Of course that didn’t work. Then I was told that money would go towards installing a clean out. $4500. After all was said and done they left a large hole in my front yard. Charged me for the first 2 procedures ($595 & $1000) and the $4500. Plus another $1200 that was added to the invoice unknown to us. So they want to charge us $7000 for a job that should of been done for around $250 if they were honest. I highly recommend NOT using Mr. Rooter Plumbing. Save yourself a lot of money and stress.
Sometimes a faucet leak can be stopped by replacing the rubber washer at the end of a faucet stem or cartridge. This is a more common repair on older fixtures when things were built to last and designed to be able to be maintained. Other times the whole stem or cartridge needs replacement or the bibb seat deeper back into the fixture needs replacement. That leads to matching up the right components and often times making a trip to the hardware store or plumbing supply house necessary due to the many varieties, makes and models of faucets. My advice is to make sure your Plumber has faucet repair kit on their truck before having them come out to assess the issue.